Hansen P4 UniMiner

Hansen Industrial Gearboxes - P4 Alignment-Free Drive

The P4 UniMiner gear units are compact and optimized for mining and other applications involving bulk-material handling.

  • Drop-In replacement for most alignment-free drives
  • Split-housing design
  • Compact to fit tight spaces
  • Variety of accessories to meet your needs

Key Facts

7 Sizes
Up to 889,000 lb-in (100,445 Nm) and 7.5in. (190mm) Shaft Size
Drop IN
Drop-in for Model R, as well as sizes 405, 425, and 2090.
71:1 Ratio
From 8:1 to 71:1, custom ratios can meet your needs.
Housing
Universal, flippable, alignment-free housing design with pilot for lantern housing along with horizontal-split housing for easy maintenance
Easy Maintenance
Accessible covers for service on-the-spot inspection and maintenance, as well as optimized-bearing selections for longer service life
Quiet
Precision carburized and ground gearing delivers maximum capacity, minimal loss and quiet operation. Low-noise geometry in high-speed gear sets
Oil Guard™
Dynamic drain-back, maintains positive lubrication of high-speed shaft
Durable
Standard epoxy paint withstands harsh mining environments. Rugged steel-cased, filtered breathers are suitable for dusty environments
Motor
Wide variety of motor-installation accessories include: lantern housings, scoop brackets, common bases, and belt-drive arrangements
Seals
Shaft sealing incorporates dual grease-purgeable seals (Split-seal retainers available as an option)
Tilt
Standard UniMiner built for 3 degrees of tilt in all directions
Mounting
Choose from a variety of mounting options to meet your needs. Solid Shaft, Keyed-Hollow Bore, or Shrink Disc options are available.

Related Hansen Industrial Gearboxes products

Hansen M4 Air Cooled Condenser Drive
Torque range
20000 Nm - 70000 Nm
177015 in-lbs - 619552 in-lbs
Ratio range
9:1 - 25:1
Shaft configuration
Parallel
Hansen P4 Single Stage
Torque range
17000 Nm - 185000 Nm
150463 in-lbs - 1637390 in-lbs
Ratio range
1.2:1 - 5.6:1
1.2:1 - 5.6:1
Shaft configuration
Parallel
Hansen P4 Multistage Horizontal - Product photo gallery
Hansen P4 Multistage - Horizontal
Torque range
6000 Nm - 1100000 Nm
53104 in-lbs - 9735810 in-lbs
Ratio range
6.3:1 - 630:1
6.3:1 - 630:1
Shaft configuration
Parallel, Right Angle
Hansen P4 Multistage - Vertical
Torque range
3000 Nm - 1100000 Nm
26552 in-lbs - 9735810 in-lbs
Ratio range
3.55:1 - 630:1
3.55:1 - 630:1
Shaft configuration
Parallel, Right Angle