Hansen P4 UniMiner
Hansen Industrial Gearboxes - P4 Alignment-Free Drive
The P4 UniMiner gear units are compact and optimized for mining and other applications involving bulk-material handling.
- Drop-In replacement for most alignment-free drives
- Split-housing design
- Compact to fit tight spaces
- Variety of accessories to meet your needs
| Sizes |
5 Sizes C - G in M series 2 Sizes G - H in Z series |
| Power | Mechanical power up to 2330 HP (1738 kW) |
| Torque | Torque up to 889,000 lb-in (100,445 Nm) |
| Ratios | Ratios from 8:1 to 71:1 |
| Accessory Options | Motor lantern and scoop, motor base, backstop, swing base, flexible or hydro-dynamic couplings, belt-drive arrangements |
| Low Speed Shaft | Solid (standard) Rigid-Rigid, Keyed Hollow, Shrink Disc Hollow |
| Bearings | Tapered, cylindrical or spherical roller types |
| Housing |
Grey cast iron (standard) or ductile iron (optional) machined on CNC machining centers Tilt angles of +/- 3 degrees without forced lubrication |
Key Facts
FAQ
Do you have questions about the Hansen P4 UniMiner Gear Unit? Below are some of our most commonly asked questions, or you can view our Support area under Knowledge for more frequently asked questions and answers.
I don’t like the turnbuckle torque arms and sometimes have reversing applications they don’t work well for, do you have another option?
Yes, we have 6 different torque arm options to make your installation easy.
What if I need to change the backstop rotation?
No problem, your Sumitomo rep can assist with that, we can instruct you how, or you can send it to us to do.
Can I adjust the speed with a direct drive like I can with a belt drive?
Not by changing a sheave size since that component is eliminated, but there are things to consider…
- How often are you really changing the speed?
- The flexibility of changing a sheave size also puts your system at risk. Are you overspeeding beyond the reducer's capabilities? Are you slowing down too much and causing the backstop spragues to drag and wear?
If you are utilizing a VFD, that can control your speed.
- If you find out you truly need to change your speed, our BBB is the only direct drive on the market that has a Cyclo cartridge that could be changed to change your overall speed eliminating the need for a whole new reducer. Work with your Sumitomo rep to consider this.
I don’t have a very long shaft, can I still replace a belt drive with a direct drive?
Yes, if our standard Taper Grip Bushing requires more shaft than you have, we have a new Taper Grip Bushing option that needs an average of ½ the shaft length. When we size up the reducer you need, we can tell you how much shaft length you need for both options.
What should be some features or upgrades I should consider for the Aggregate, Sand and Cement industries?
Taconite Seals, Severe Duty or Desiccant Breather
What type of lubrication method does the P4 use?
Hansen P4 units use one of the following systems:
- Splash Lubrication (standard with horizontal shaft gear units for speeds between 750 and 1800RPM at the high speed shaft. Gears and output shaft bearings are lubricated by immersion in the oil bath. Oil splash from gears fill the oil pockets in the housing, assuring gravity circulation lubrication of the bearings via channels in the housing and covers.)
- Force Feed Lubrication (all rotating elements above oil bath level are lubricated by a gear pump forcing the oil through pressure lines. Forced feed lubrication is available as circulation lubrication or pressure lubrication.
How often do I change the oil?
The first oil change should be carried out preferably after 100 hours and not more than 800 hours of operation. The removed oil may be used again after filtering. Filter the oil volume at least 10 times using a 10mm filter or smaller. Subsequently the oil should be renewed after 4000 to 8000 hours or maximum of 18 months of operation depending on working conditions. Please refer to service manual for detailed oil change instructions.
What type of lubrication should be used?
Mineral oils containing EP additives, which increase oil film load capacity should be used. Refer to the P4 service manual for recommended oil types.
Related Hansen Industrial Gearboxes products
Enhance Your Industrial Operations with Sumitomo
Our industrial solutions set the standard in durability, efficiency, and innovation. Engineered to handle the toughest challenges, we are the reliable choice for your operations.