Fine Cyclo DA-Series
High precision gearbox with highest torque density in a single stage
Angular contact ball bearings directly integrated in the gearbox housing.
Improved design providing very accurate motion quality and increased torque density and bearing capacity.
- Highest torque density in a single stage unit
- Ideal for robotic applications
- Hollow shaft possible
- Fully sealed modular version with motor adapter and clamp ring available
| Zero Mechanical Backlash | |
| Lost Motion | <1 arcmin |
| Number of Sizes | 5 |
| Reduction Ratios | 29:1 / 41:1 / 59:1 / 89:1 / 119:1 (availability depending on size) |
| Nominal Output Torque | 148 Nm up to 1334 Nm (at n1 = 1,500 rpm) |
| Acceleration Torque | 417 Nm up to 3188 Nm |
| Max. Momentary Peak Torque | 834 Nm up to 6377 Nm |
| Input speed | up to 6150 rpm |
| Max. Bending Moment | 883 Nm up to 2943 Nm |
| Bending Stiffness | up to 2450 Nm/arcmin |
| Max. Axial Load | 3924 N up to 10791 N |
| Torsional stiffness | up to 450 Nm/arcmin |
Key Product Facts
Advantages of Fine Cyclo D-Series
Main dimensions and mass
| Size | Length L (1) [mm] | Diameter G [mm] | Diameter D [mm] | Diameter d1 (2) [mm] | Mass (3) [kg] |
|---|---|---|---|---|---|
| D15 | 84 | 145 | 90 | 19 | 7 |
| D25 | 97.5 | 169 | 114 | 24 | 12 |
| D30 | 112.5 | 187 | 140 | 32 | 15.5 |
| D35 | 110 | 204 | 140 | 35 | 20.5 |
| D45 | 127 | 256 | 174 | 38 | 35.5 |
Diameter G = Casing diameter
Diameter D = Output major diameter
Diameter d1 = Input shaft diameter
(1) the total length is dependent upon the motor adaptor
(2) maximum values, adjusted to customer motor
(3) average value, depending on motor adapter
Torque and Speed main data
| Size | Nominal output torque (1) [Nm] | Accel. / decel. torque [Nm] | Max input speed (2) [rpm] | Max input speed short term [rpm] | |
|---|---|---|---|---|---|
| D15 | (i 41) | 148 | 417 | 4700 | 5650 |
| (i 59, 89) | 171 | 417 | 5600 | 6150 | |
| D25 | (i 41) | 315 | 883 | 3860 | 4650 |
| (i 59, 89, 119) | 370 | 883 | 4200 | 5050 | |
| D30 | (i 59, 89, 119) | 483 | 1226 | 3800 | 4550 |
| D35 | (i 29) | 499 | 1393 | 2960 | 3500 |
| (i 59, 89, 119) | 683 | 1717 | 3300 | 3950 | |
| D45 | (i 29) | 1058 | 2914 | 2240 | 2700 |
| (i 59, 89, 119) | 1334 | 3188 | 2600 | 3150 | |
(1) at input speed n1=1500 rpm
(2) at 50% ED
Output bearing capacity
| Size | Max permissible bending moment [Nm] | Max permissible axial load [N] |
|---|---|---|
| D15 | 883 | 3924 |
| D25 | 1177 | 3924 |
| D30 | 1668 | 5199 |
| D35 | 1962 | 7848 |
| D45 | 2943 | 10791 |
Available ratios
| Size | Ratios |
|---|---|
| D15 | 41 / 59 / 89 |
| D25 | 41 / 59 / 89 / 119 |
| D30 | 59 / 89 / 119 |
| D35 | 29 / 59 / 89 / 119 |
| D45 | 29 / 59 / 89 / 119 |
Above technical specifications are intended for rough preselection only.
How often does the Fine Cyclo® require maintenance?
Customers should never open the Fine Cyclo. The reduction stages of the FA-Series reducers are lubricated for life. Additionally, their internal components are matched in such a way that makes re-assembly very difficult for untrained personnel. If desired, customers may return Fine Cyclos to Sumitomo for grease replenishment after 5 years in order to increase service life.
Related Fine Cyclo® products
Enhance Your Industrial Operations with Sumitomo
Our industrial solutions set the standard in durability, efficiency, and innovation. Engineered to handle the toughest challenges, we are the reliable choice for your operations.